Editing Getting Started (section)

=== Powering your F256Jr ===

The F256Jr is supplied as a Mini-ITX form factor mainboard, with a standard 24 pin ATX power supply connector for power connectivity.

Since the F256Jr needs relatively little power, compared to a mini-ATX PC, a popular DC 12V 24pin Pico ATX PSU works well and is a compact solution.

* [https://www.amazon.com/dp/B08F57GKCL Pico PSU] - You power the Pico PSU via a 12V DC center-positive Power Supply source.
* [https://www.amazon.com/dp/B07MXXXBV8 12V DC center-positive A/C Adapter] - Commonly used to power the Pico PSU.
The board itself has no power switch. If you do not have a Mini-ITX case, a pin header on the board can be bridged by a jumper and thereby used instead of a proper power switch as a stop gap solution. In this picture https://wiki.c256foenix.com/images/6/64/Pinout_Jr_December_7th_Trans.png  the pin header in question is shown in the lower right and is labeled with ''PW ON SPST Switch''.