FNX6809 Overview: Difference between revisions

From F256 Foenix
Jump to navigationJump to search
(Initial page for FNX6809)
 
(Added image of the JTAG Adapter correct orientation (from Discord).)
Line 15: Line 15:
* No software is written for the unit to support the processor at this time (but see [[OS-9]]). It is meant for them Mavericks that are ready to take it on without any safety nets. There is a version of Calypsi that supports now if anybody wants to use it.
* No software is written for the unit to support the processor at this time (but see [[OS-9]]). It is meant for them Mavericks that are ready to take it on without any safety nets. There is a version of Calypsi that supports now if anybody wants to use it.
* Keep in mind that you will need to upload a new load for the FPGA on the F256Jr or F256K to support it, so make sure you equip yourself with a USB Blaster.
* Keep in mind that you will need to upload a new load for the FPGA on the F256Jr or F256K to support it, so make sure you equip yourself with a USB Blaster.
[[File:FNX6809_JTAG_Adapter_Position.jpg|thumb|left|FNX6809 JTAG Adapter Correct Orientation]]

Revision as of 15:34, 1 June 2024

FNX6809 for F256Jr & F256K

FNX6809 CPU Module
FNX6809 FPGA Flash Adapter

The FNX6809 is a DIP40 module that is effectively a Cycle Accurate Motorola MC6809 CPU, working @ 3.3V and capable of running @ 6.29MHz on the F256Jr or the F256K.

The FNX6809 also differs from a real Motorola MC6809 CPU in that it has the 65C02 pin-out.

For these reasons, it is not designed (at least for now) to be a direct replacement for an MC6809.

An Adapter is supplied with the FNX6809 module to be enable reflashing the on-board FPGA, if ever needed.

Note:

  • No software is written for the unit to support the processor at this time (but see OS-9). It is meant for them Mavericks that are ready to take it on without any safety nets. There is a version of Calypsi that supports now if anybody wants to use it.
  • Keep in mind that you will need to upload a new load for the FPGA on the F256Jr or F256K to support it, so make sure you equip yourself with a USB Blaster.


FNX6809 JTAG Adapter Correct Orientation