FNX6809 Overview
From F256 Foenix
FNX6809 for F256Jr & F256K[edit | edit source]
![](/images/thumb/f/f3/FNX6809_Transparent_SideView.png/300px-FNX6809_Transparent_SideView.png)
![](/images/thumb/9/90/FNX6809_Adapter.jpeg/300px-FNX6809_Adapter.jpeg)
The FNX6809 is a 40 pin dual inline package (DIP) module that is a cycle accurate implementation of the Motorola MC6809 CPU, working @ 3.3V and capable of running @ 6.29MHz on the F256Jr or the F256K.
The FNX6809 also differs from a real Motorola MC6809 CPU in that it has the 65C02 pin-out.
For these reasons, it is not designed (at least for now) to be a direct replacement for an MC6809.
An adapter is supplied with the FNX6809 module to be enable reflashing the on-board FPGA, if ever needed.
Note:
- No software is written for the unit to support the processor at this time (but see OS-9). It is meant for those Mavericks who are ready to take it on without any safety nets. There is a version of Calypsi that supports now if anybody wants to use it.
- Keep in mind that you will need to upload a new load for the FPGA on the F256Jr or F256K to support it, so make sure you equip yourself with a USB Blaster.
- There is a nice web-based 6809 emulator you can try here.
![](/images/thumb/7/73/FNX6809_JTAG_Adapter_Position.jpg/300px-FNX6809_JTAG_Adapter_Position.jpg)